Square D Pumptrol Pressure switch for compressed air compressor 9013FHG12J52M1X 95-125 psi With Unloader & On/Off Lever…

Make sure this fitsby entering your model number.
Square D brand Pumptrol air compressor pressure switch model 9013FHG12J52M1X 95-125 PSI with unloader control valve and On / Off switch.
This pressure switch is designed for a single stage air compressor pumping up to 125 PSI but can be adjusted anywhere from 70-150 PSI.

BUY NOW

Added to wishlistRemoved from wishlist 0

Brand new Square D brand Pumptrol air compressor pressure switch model 9013FHG12J52M1X 95-125 PSI with unloader control valve and On / Off switch. This pressure switch is designed for a single stage air compressor pumping up to 125 PSI but can be adjusted anywhere from 70-150 PSI. This switch features a built in On / Off metal lever and also a unloader located on the bottom of the switch. The unloader is used to unload head pressure off the compressor pump for a load free start up. If your compressor does not require a unloader valve on the pressure switch you can leave it not hooked up and the switch will still function properly. This is an authentic Square D brand pressure switch, for more specifications see below. Specifications: Brand: Square D Pumptrol Model: 9013FHG12J52M1X Number of Pressure Sensing Connection Ports: One 1/4″ Female NPT (Note: 1/4″ NPT Measures About 1/2″ In Diameter) Unloader Connection Port: 1/4″ Compression Which Accepts 1/4″ Outside Diameter Copper Or High Pressure Tubing Preset On Pressure: 95 PSI Preset Off Pressure:125 PSI Differential: 30PSI Can Be Used With Single Or Three Phase Can Be Used With 110 – 575 Volts Depending On Amperage And Phase Good Up To 15 Amps Of Continuous Current. (Note: If being used with a magnetic starter the amperage does not matter since all the main power is going through the starter not the pressure switch.)

Make sure this fitsby entering your model number.
Square D brand Pumptrol air compressor pressure switch model 9013FHG12J52M1X 95-125 PSI with unloader control valve and On / Off switch.
This pressure switch is designed for a single stage air compressor pumping up to 125 PSI but can be adjusted anywhere from 70-150 PSI.
This switch features a built in On / Off metal lever and also a unloader located on the bottom of the switch.
The unloader is used to unload head pressure off the compressor pump for a load free start up.
Unloader Connection Port: 1/4″ Compression Which Accepts 1/4″ Outside Diameter Copper Or High Pressure Tubing

Specification: Square D Pumptrol Pressure switch for compressed air compressor 9013FHG12J52M1X 95-125 psi With Unloader & On/Off Lever…

Manufacturer
Brand
Square D Pumptrol Pressure switch for compressed air compressor 9013FHG12J52M1X 95-125 psi With Unloader & On/Off Lever…
Square D Pumptrol Pressure switch for compressed air compressor 9013FHG12J52M1X 95-125 psi With Unloader & On/Off Lever…
Best USA Tools
Logo
Enable registration in settings - general